Featured
- Get link
- X
- Other Apps
Programing Hunter Sprinkler System
Programing Hunter Sprinkler System. How to program a hunter xcore sprinkler irrigation timer. The et system will then.

Or shoot us an email ! Turn the dial to set watering start times. Check the current time the monitor at the top left shows time.
It's Easy To Program An Automatic Sprinkler Controller.
The sensor ports can also start an irrigation cycle. We always look forward to hearing from you. The reboot will not erase any settings in your controller.
Adjust The Master Valve Of Your Sprinkler System By Turning The Flow Control Clockwise Until The Stream Of Water From The Nozzle Begins To Drop.
The node uses standard hunter controller programming with 3 programs (a, b, c) and 4 start times per program. Your first step will be to set up the correct time and date on your sprinkler controller. Setting program start time note:
④ Pessr I To Select The Next Start Time,
Just match your steps with it. To create a program on your node battery operated sprinkler controller press the center button to access the start time programming option. ① turn dial to the start times position.
This Video Provides An Overview Of Basic Offline Programming With Your X2 Controller.
Sensor port works with the hunter hc flow meters, the hunter clik sensor range and standard rain and soil sensors to stop irrigation. We can be reached at ph: Due to the available water pressure of 3,5bar, the water flow rate is 9,7l / min.
Step 1 Step 2 Step 3 Copyright 2019 Hunter Industries.
From the home screen, tap on settings. Sprinkler system design capacity b. When using 2 sprinklers, i come to 2 x 9.7 l / min = 19.4 l / min.
Popular Posts
Best Way To Get Cocaine Out Of Your System
- Get link
- X
- Other Apps
Solving Systems Using Matrices Quiz Part 2
- Get link
- X
- Other Apps
Comments
Post a Comment